Introducing Engine Terminology

-







 



Comments

Post a Comment

Popular posts from this blog

ఐడెంటిఫై ది మెషిన్ ఎక్విప్మెంట్ ఇన్ డీజిల్ మెకానిక్ ట్రేడ్

-
Image
 continous 2 page జిబ్  క్రేన్ జిబ్ క్రేన్  ఐస్ ఉసెడ్  ట  ట్రాన్స్పోర్ట్ ది  ఒబ్జెచ్త్స్ ,ఫ్రొం ఒన్  ప్లేస్  ట  అందర్  షాప్  ఫ్లోర్ సెన్సిటివ్  బెంచ్  డ్రిల్లింగ్ మెషిన్   .థిస్  మెషిన్ ఐస్  సిబాల్ అఫ్ డ్రిల్లింగ్ హోల్స్ అప్ తో 12.5ఎం ఎం దిమ్మెటర్ ది డ్రిల్స్ అర్ ఫిట్టేడ్ ఇన్ ది చక్ ఆర్  దిరెచ్త్ల్య్ ఇన్ ది తాపేరేడ్ హోల్  అఫ్ ది మెషిన్  స్పిణ్డలే . ఫర్ నార్మల్ డ్రిల్లింగ్ ది వర్క్ సర్ఫాన్ ఐస్ కెప్ట్ హారిజాంటల్ ఈఫ్ ది హోల్స్ అర్ తో బె డ్రిల్ల్డ్ అటు ఆన్  ఆంగల్  ది టేబుల్ చన్ బి  తిల్టెడ్.
Read more

Chapter - XII Miscellaneous

-
    477. Refund of Fees :-  Subject to the provisions of Rules 478 and 479 the Secretary, State Transport Authority or the Secretaries or Additional Secretaries of the Regional Transport Authorities as the case may be, may on application, sanction the refund of: (i) the full fee paid; where the conductor’s Licence, the driving Licence or badge applied for is refused or the application for the conductor’s Licence, the driving Licence or badge is cancelled or withdrawn by the applicant before the conductor’s Licence, the driving Licence or badge, as the case may be, is actually issued and the transaction completed:- (ii) the excess, where the amount paid is in excess, of the proper fee; (iii) the full fee paid, where the fee was paid by mistake; and (iv) the full fee paid, where the notification in respect of a route issued by a Transport Authority is subsequently withdrawn for technical reasons, or where the remittance of the fee is not followed by an application for the purpose for whi
Read more

Engine Water Pump Construction

-
Image
Engine Water Pump Construction Car’s water pump   is creating forced cooling fluid circulation in the   cooling system   of the   engine . Some water pumps are structurally combine with fans and have a common drive. So the engine water pump installs on the front end of the   cylinder block . The water pump housing 3 consists of two parts:  one part of the housing is cast from iron and attach to another, which is made together with the cover of the block of distribution gears of aluminum alloy. The water pump shaft  2  and the fan hub  1  rotate on two ball bearings  14  install into the housing  3 . Special snap rings and spacer sleeve keep ball bearings from shifting. There are seals to hold lubricant and to protect against contamination. Engine Water Pump Construction Engine Water Pump Construction 1 – fan and pulley hub; 2 – shaft; 3 – housing; 4 – inspection hole for the release of lubricant from the housing; 5 – lubricator; 6 – water pump impeller; 7 – a control aperture for an ex
Read more