Auto solution's

New changes under Motor Vehicle Act 2019 The Traffic Rules in India are set as per the New Motor Vehicle Act 2019. Under the revised act, the penalties for traffic violations have been increased significantly and have turned more stringent than ever. Driving Without License:  If you are caught driving without a licence, a fine of Rs 5,000 will be required to be paid by you. This is an increase of ten times from the earlier fine of Rs 500. Driving Without Insurance:  As per the new Motor Vehicle Act 2019, the penalty for driving without insurance for the motor vehicle has been increased from Rs 1,000 and /or imprisonment of up to 3 months to Rs 2,000 and/or imprisonment of up to 3 months for the first-time offenders and Rs 4,000 and/or imprisonment of up to 3 months for the second-time offenders. Driving With Disqualified DL :  In case one is found driving with a disqualified licence, he or she can be fined for Rs 10,000. This fine was just Rs 500 earlier. Driving Under the Influence of

 PROCEDURE  1} Check the water level in the radiator and top up if needed.  2} Check the engine oil level and top up, if needed.  3} Check the electrolyte level in the battery and top up with distilled water if needed.  4} Insert the key in the main switch  and press fully in and turn the key to the `ON' position.   5} Observe the ammeter  on the instrument pannel. The indicator of the meter will show slightly on the discharge side (-ve side) of the meter and the ignition bulb  will glow red and also the oil pressure indicator  will glow.  6} Observe the fuel gauge . The indicator indicates the fuel in the tank from empty to full. Note down the quantity of fuel in the fuel tank . 7} Depress the accelerator lever fully.  8} Press the starter `button' or turn the ignition key further and crank the engine 9} Release the starter button /key as soon as the engine has started.                    Once the engine starts do not touch the starter switch.  10} If the engine does not star

  MECHANIC DIESEL TOOLS LIST The following tools list represents a starter set of diesel mechanics tools.  Laptop or tablet able to accesses the internet, work with various manufactures websites and learning platforms, (most will without issue)  Adapters ¼-inch to ⅜-inch ¼-inch to ½-inch ⅜-inch to ¼-inch ⅜-inch to ½-inch ½-inch to ⅜-inch ½ to ¼-inch ½-inch to ¾-inch ¾-inch to ½-inch Allen Drivers Standard 3/32-inch to ⅜-inch and metric 3-millimeter to 17-millimeter Standard Allen wrench set .05-inch to ⅜-inch Metric Allen wrench set 2-millimeter to 12-millimeter ¼-Inch Drive Socket Set Standard (shallow and deep, SAE) 3/16-inch to ⅝-inch Metric (shallow and deep) 5-millimeter to 15-millimeter Standard depth 3/16-inch to ½-inch Deep 3/16-inch to ½-inch Standard depth 4-millimeter to 13-millimeter Deep 4-millimeter to 13-millimeter Short, medium, long extensions Ratchet handle Universal joint ⅜-Inch Drive Sockets Standard (SAE, deep, shallow and impact) 5/16-inch to 1-inch Metric (deep,

INTRODUCTION OF FASTENERS i)- All big or small machines are made by joining different parts.  ii)- There are so many methods to assemble the machines parts with each other these are called fasteners.  iii)- The process by which these are assembled is called fastening.  iv)- There are three main methods of fastening: (a) Temporary  fastening , (b) Semi-permanent  fastening , (c) Permanent fastening (a) Temporary Fastening :  i)- This is a type of  fastening  by which different parts of machine can be opened or re-assembled without any damage.  ii)- In this neither job nor fastener is damaged like nut and bolt, key, screw and pin etc. (b) Semi-permanent Fastening:   i)- In this method there is no risk of damage to job but fastener is damaged.  ii)- This system is used where there is a chance of opening of the parts due to some reason, For example soldering and riveting etc is Semi-permanent Fastener. (c) Permanent Fastening:  i)- This is a such type of fastener which becomes part of a ma

  Screw:- i)- Screw is used to joint or assemble two parts.  ii)- Entire body contains thread except head. iii)- Nut is not required where screw is used.  iv)- screw are like bolt. v)- Screw used in wooden work is called wood screw. vi)- Screw used in metal and non-metal are called machine screw. machine screw:- i)- When nut cannot used in assembly in that situation machine screw are used ii)- The component of assembly directly tighten with screw for this thread in component is must. iii)-  Machine screws are used for general assembly work. iv)-  It is manufactured in both COARSE and FINE series. Types of machine screw:- i) There are different types of machine screw used in machine work. 1- Hexagonal Head Screw. 2- Hexagonal Socket Head Cap Screw. 3- Square head Counter Sink Head Screw. 4)- Square Head Screw. 1- Hexagonal Head Screw:- i)-This type of screw is used,when there is no disturbance in the assembly of component. ii)- The head may out from the job surface and machine will work